While record rainfall has been occurring in the Pacific Northwest this winter, the sun has shown on our iTech students and #FVvr. As we made our way to Fort Vancouver National Historic Site we had one element to deal with, the wind. Sometimes you forget to account for certain things during projects, and this was one of those things. When we practiced taking footage for the VR tour we accounted for many different things. We made sure that our students weren't going to be in the images, every student knew how to operate the Theta S camera and app, and made sure to limit the footprint of our tripods. Unfortunately, it was this last piece that led to a broken camera. To make sure the photospheres had a minimal footprint to cover up we didn't extend the tripod's legs all the way. This worked extremely well with the cameras that were inside away from the wind. However, the wind blew over the camera that was capturing and we lost footage. This could have been detrimental and really set us back, but the other teams of students worked extremely efficiently. Since we planned out the shooting locations of the images, the other teams were ahead of schedule. This allowed us to go back and get the footage needed to complete our tour.
The students did a remarkable job. Everyone, including the park rangers and chaperones, were thrilled with how the students worked. Now we have the footage that we need to make the virtual reality tour. When we returned to the classroom, we spent our time finishing the artifact analysis scripts, sent the writing to be reviewed by rangers Tessa and Bob, and began to create the building tours using . Holobuilder Now, for a little relaxation during spring break...
Since the visit from Park Rangers Tessa Langford and Bob Cromwell of the Fort Vancouver National Historic Site came to our school, Vancouver iTech Preparatory, our students have been busy. They have been broken down into different teams to research the different buildings and areas of the park. To do this, we allowed students select three possible locations that they were interested in, then we were able to divide the students into teams based on research interest. This gives the students voice and choice in the project. Once that occurred we went on our scouting field trip. On that trip, the students toured the entire park and then got to spend some time in the buildings that they are researching. When they were in their buildings, they needed to select at least one artifact that they found interesting to conduct research on.
After the first trip to the park, students began their research and work. Each team of students began looking through the resources on the Fort Vancouver National Historic Site's webpage, several publications ,such as Exploring Fort Vancouver, the Google Cultural Institute, and even emailing with Park Rangers Tessa and Bob to conduct their research. Each student is writing a script for a narration on their artifact, and building. This process allows the students to build their research, analysis, and summarization skills along with enhancing their speaking and collaboration skills.
During the days before the filming field trip, the students got to work in their teams to play and practice with the technology needed to capture the 360º images for the tour. We went over the basic operations of using the Theta S camera and how to use the iPad app to take the images so that they don't appear in the final product. This is done not only for student privacy reasons, but also so the user gets a more authentic visual experience. This allows the students the chance to make some mistakes and have some failure and success with the new technology before we get to the fort for the real photo shoot.
x
Because time was limited to just over two hours for our second trip, we wanted to make sure we were efficient getting the footage that we needed. The student teams used several different tools to make a map of their building and mark out their filming locations. Some teams, like the one researching the Garden and outside grounds, used a screenshot of Google Maps as their base before putting the image Google Drawings to add in their filming locations. Many teams used Google Drawings to sketch out the different rooms and artifact locations. A couple of teams decided to build a 3D model of their building using SketchUp, while some drew theirs out by hand on graph paper. Regardless of which medium and tools they used, they developed critical thinking skills alongside their collaboration and communication skills. into
Stay tuned for more, including the photo shoot field trip and script narrations...
A couple of weeks ago my students, colleague, and I embarked on a new project at our S.T.E.M. and PBL based school, Vancouver iTech Preparatory. FVvr (pronounced fever) is a project in which our Washington State History studnets work as historians, curators, and archaeologists to create a virtual reality tour of the Fort Vancouver National Historic Site. This is an ambitious project that has been in the works for well over a year.
To make this project a [virtual] reality (pun intended), we had to work with the fort and the National Parks Service. We meet several times trying to figure out what we might do. And, while we have some ideas, the fun part is not knowing exactly how it will turn out. We have a deadline, have had the curators and park rangers visit our school, and have had a scouting field trip already.
Right now students are selecting the artifacts that they want to research and collaborating in their teams to map out the building and other locations that they will need to photograph next week. Some teams are emailing the park rangers and asking them questions in preparation, other are sending them pictures of items that they want to know more about. It is amazing to watch the students step up and craft well written professional emails as they communicate with the rangers. This is part of the PBL experience that I am passionate about. I facilitate, but they are doing the work. They are getting the experiences. Next week, we head back to use our special Theta S cameras to take 360º photospheres throughout the park. I can't wait to see how they deal with the sharing and utilization of the technology. The goal is to provide our students with the experience of creating something not just for themselves, but for our community, and the world. It is important to learn and explore our local history. It'll be even more fun to share it beyond our borders.
I have always been a fan of technology. I believe that technology can and must be integrated into the classroom for our students. During my 2014-2015 winter break I was preparing for IMPACT! a project that would look at Mount St. Helens and its impact on people and society in Washington state. As I was playing around on Google Maps, I saw that it was possible to put 360º images up onto Google. I was EXCITED! I had taken one from the summit when I climbed it the previous year and wanted to put that out for the world to see. I had used the iOS app 360 Panorama, and was not able to load it. I needed to see how I can load 360º images to Google.
That is when I came across the Google Photosphere program, which has since been updated to the Street View program. I saw that you could take a 360º image using the Street View app, for either iOS or Android, and then upload to Google Views and Google Maps. Then I came across a section that showed a new camera that allowed a user to take a 360º image with the click of a button. I showed the Ricoh Theta camera to my principal and she was blown away. I purchased one and began to think about the possibilities of using the camera in my social studies classrooms.
I immediately thought of taking my studnets to the Fort Vancouver National Historic Site. I began scouting the site on my own, and then made contact with the the park historian and museum curator. We met and began our collaboration. We tried to make the project fit into the the end of last school year, but that was unreasonable. We decided to push the project back to this school year (2015-2016). Pushing back the project allowed for other applications to be developed that will help us create our final product. During the time, the web application Holobuilder came out and now we have our way to connect the different images and create our tour. The fantastic thing about Holobuilder is that not only is it easy to use, but the tours can be embedded on a website and be viewed using VR devices like Google Cardboard and the View-Master.
A sample tour I made using footage from the climb of Mount St. Helens some colleagues and I did over the summer.
I am getting excited about this upcoming project and the possibilities that these cameras and viewers will allow us to do in our classrooms. With the Google Expeditions program traveling across the country, and the world, we are starting to see the power that this type of experience can have for our students. No longer to they have to just look at a still image in a book or a print out. They can see first hand the places that they are investigating. They can analyze and compare the architecture of Canterbury Cathedral versus the Golden Pavilion-Kinkaku. No longer does the classroom have to be static. This technology allows our classrooms to become engaging, energetic, and dynamic. I encourage everyone to take their students on a virtual field trip, whether it is through a computer, a mobile device, or a Cardboard viewer. I encourage you to visit the Google Street View Gallery, or app, and take your students to places you never thought possible.